Manual tools

A301 / A412

Manual tensioner A301 is specially designed for flat objects and packages. Thanks to the feed wheel tensioning system an unlimited band take-up is permitted, guaranteeing taut tension tension with no tension loss. Using manual sealer model A412 the double notch joint is produced in one operation. The ideally curved levers prevent the handle from jamming, guaranteeing rational working with no risk of hand injury.

Strap qualities:

Regular duty (Uniflex)
up to 850 N/mm²

High tensile (Ultraflex)
up to 1100 N/mm²

Strap dimensions:

19.0 – 32.0 x 0.50 – 1.00 mm

¾ – 1¼ x .020 – .040"

Sealing type:

Metal seals

Weights:

A301: 3.5 kg / 7.7 lbs

A412: 3.4 kg / 7.4 lbs

A402 / A412

Model A402 is especially well suited for round packages with a very small supporting surface. Here too an unlimited take-up is possible and the double notch joint is produced using the manual sealer A412. The ideally curved levers prevent the handle from jamming, guaranteeing rational working with no risk of hand injury. The rubber spacer on the lower lever also permits sealing with both hands on the upper lever.

Strap qualities:

Regular duty (Uniflex)

up to 850 N/mm²

High tensile (Ultraflex)

up to 1100 N/mm²

Strap dimensions:

19.0 – 32.0 x 0.63 – 1.00 mm

¾ – 1¼ x .025 – .040"

Sealing type:

Metal seals

Weights:

A402: 4.0 kg / 8.8 lbs

A412: 3.4 kg / 7.4 lbs

A431

This lightweight and handy combination strapping tool is ideal for strapping bars, tubes, bundles and goods with an extremely small surface. Simple to operate and totally independent of any energy source the A431 has become as the ideal helper. Lap-over seals provided with a single notch joint are used for sealing.

Strap qualities:

Regular duty (Uniflex)

up to 850 N/mm²

High tensile (Ultraflex)

up to 1100 N/mm²

Strap dimensions:

10.0 – 19.0 x 0.38 – 0.63 mm
¾ – ¾ x .015 – .025" 

Sealing type:

Metal seals

Weight:

3.4 kg / 7.5 lbs